Comments on: WPA Enterprise

By: http://www.deskapahendri.com/2011/02/28/jasa-setting-mikrotik-dan-proxy-super-ngebut-24-jam/

Fri, 09 Dec 2011 23:47:30 +0000

Jasa Setting Mikrotik Jasa Setting Proxy

By: Rachel Harris

Rachel Harris — Tue, 29 Nov 2011 22:40:50 +0000

Any business has physical resources, such as machines, buildings, equipment and facilities to run its operations. These fundamental resources are also called enterprise assets. Organizing these assets in an orderly and systematic manner to produce an integrated unit is called enterprise asset management.

By: Rob Durdy

Rob Durdy — Tue, 04 Jan 2011 00:14:15 +0000

Could not concur a lot more with that, very interesting article. Thank You.

By: Secure Network - Basic Security | Sekolah Linux Indonesia

Secure Network - Basic Security | Sekolah Linux Indonesia — Sat, 26 Jun 2010 08:58:41 +0000

[...] Felipe Alfaro Solana » Blog Archive » WPA Enterprise – This document explains how to set up WPA/WPA2 Enterprise using EAP-TTLS (with PAP) as the authentication mechanism. Introduction. The original IEEE 802.11 standard defined two basic security mechanisms: Open System Authentication, which … [...]

By: claudio allocchio

claudio allocchio — Mon, 04 Jun 2007 10:35:53 +0000

Hallo,
wehave installed a freeradius and trying to use the OSX supplicant to access our 802.1X authntication… and we get a very strange error:

Warning: Found 2 auth-types on request for user ‘Claudio Allocchio’
auth: type “EAP”
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 139
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: >> TLS 1.0 Alert [length 0002], fatal decode_error
TLS Alert write:fatal:decode error
TLS_accept:error in SSLv3 read client certificate B
rlm_eap: SSL error error:14089087:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:cert length mismatch
rlm_eap_tls: SSL_read failed in a system call (-1), TLS session fails.
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
modcall[authenticate]: module “eap” returns handled for request 139
modcall: leaving group authenticate (returns handled) for request 139
Sending Access-Challenge of id 197 to 10.10.10.10 port 32769
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
Tunnel-Type := VLAN
Tunnel-Medium-Type := IEEE-802
Tunnel-Private-Group-Id := “20″
EAP-Message = 0x011400110d800000000715030100020232
Message-Authenticator = 0×00000000000000000000000000000000
State = 0x92c1d228d559586481cb7c8b1a4f49f9
Finished request 139
Going to the next request

any idea?

By: Miguel Fernández

Miguel Fernández — Thu, 16 Nov 2006 15:11:20 +0000

Hola:
Te escribo porque necesito ayuda para configurar un servidor freeradius en fedora core 6, yo no soy usuario linux y se me está haciendo muy dificil, pero espero poder lograrlo. me gustría saber donde puedo conseguir un manual en español pero para “tontos”.
Muchas gracias.

By: DeMi

DeMi — Sat, 10 Jun 2006 11:49:49 +0000

Great article!!

I would like to configure this with windowsXP SP2. I have succesfully configured freeradius on a debian server and i have secureW2 up and running but its failing to work. I only get Sat Jun 10 13:45:43 2006 : Error: TLS_accept:error in SSLv3 read client certificate A
. I know this shouldn’t be any problem but thats just the only log i get… Windows keeps telling me that he cant find a certificate if i try via smartcard/certificate method.

Any help would be appreciated.

DeMi