Comments on: Controlling the WRT54G/GS leds

By: Felipe Alfaro Solana

Felipe Alfaro Solana — Wed, 05 Jul 2006 09:53:58 +0000

Well, if using GPIO util to hardcode GPIO numbers into scripts is just ignorant and stupid, could then anybody propose a way to change how leds work in Linksys WRT54G without using GPIO?

By: Antonio

Antonio — Tue, 04 Jul 2006 21:13:08 +0000

# wget http://openwrt.org/downloads/gpio.tar.gz
Connecting to openwrt.org[195.56.146.238]:80
gpio.tar.gz 100% |*********************************************************************************************************| 444 00:00 ETA
# tar xzvf gpio.tar.gz
what-happened-to-gpio.txt
# cat what-happened-to-gpio.txt
What happened to the GPIO utility?

GPIO is a ‘general purpose io’, which depending on your point of view
is either a register that controls a hardware io or vice versa. The
gpio util was a diagnostic tool for controlling the GPIO pins, it was
never an intended as abstraction. Each device has the GPIO pins wired
slightly different, which is why we have abstractions like the ones in
/proc/sys/reset and /proc/sys/diag; using the gpio util to hardcode
GPIO numbers into scripts is just ignorant and stupid.

- mbm

By: ariel weblog

ariel weblog — Wed, 04 Jan 2006 04:23:31 +0000

WRT54G

Ya estoy decidido.. tengo que comprar un linksys de estos para jugar un poco, ya que son muchas las cosas que he visto por internet que han hecho con estos juguetitos de Linksys….

…

By: meneame.net

meneame.net — Tue, 20 Dec 2005 23:46:25 +0000

Controlar los leds de un Linksys WRT54G

Si estás utilizando OpenWRT en un router Linksys WRTG54G, WRT54GS o WRT54GL, ¿sabías que puedes controlar los leds mediante la utilidad gpio? ¿Sabías que, además, debajo del logo de Cisco, existen dos leds, uno de color ámbar y otro de color bla…